Milad Javadi
2015 Chevrolet
Corvette Z06 3LZ HENNESSY 1000HPE PERFORMANCE 195K BUILD 1000hp
SOLD
Ext. Color: | Gray |
Int. Color: | Black |
Mileage: | 19821 |
Engine: | 6.2L Supercharged V8 650hp 650ft. lbs. |
Trans: | 8-Speed Shiftable Automatic |
VIN# | 1G1YU2D64F5606228 |
Stock# | 606228 |
Description
BUILD 195K!! 2015 CHEVROLET CORVETTE Z06 3LZ HENNESSY 1000HPE PERFORMANCE 6.2L V8 F DOHC 16V GASOLINE REAR WHEEL DRIVE, Engine: 8 Cylinder Engine Transmission: TRANSMISSION, 8-SPEED PADDLE SHIFT WITH AUTOMATIC MODES Exterior: Shark Gray Metallic Interior: Jet Black, 19K Miles! clean title, carfax certified,
Has been serviced and maintained, just service, never been smoked in, high valued options include,
This Hennessey Corvette Was the 3rd one built and is signed by John hennessey, It is very well taken care of and garage kept, previous owner barely drove it, All standard hennessey Upgrades listed below,
Corvette Z06 HPE1000 upgrade
Includes:
High-flow supercharger system.
Extreme duty intercooler system.
416 CID Stroker motor.
4.0-inch Stroker crankshaft.
Custom forged aluminum pistons with 10.0:1 compression rati
& steel wrist pins.
6.125-inch Billet steel H-beam connecting rods with ARP bolts
Balance, blueprint & assemble shortblock: fully de-bur block,
line hone block with ARP main studs, deck block.
Bore block on 3-axis CNC mill, hone block with torque plates,
balance crankshaft, check bearing clearances.
Assemble shortblock.
CNC Ported Cylinder Heads ports- Competition valve job,
extensive flow testing, chambers milled to desired cc.
Lightweight hollow stem intake valves, exhaust valves.
Extreme duty dual valve springs.
Titanium retainers, machined locators & locks, GM valve seals.
Chamber volumes measures & adjusted for compression.
CNC work hand blended into valve job, spring pressures
measured & adjusted.
HE hydraulic roller camshaft upgrade.
Hydraulic lifter upgrade with extreme duty pushrods.
1.75 inch stainless steel long-tube headers.
Stainless steel mid-pipe exhaust upgrade.
High-flow catalytic converters.
HP engine management upgrade & chassis dyno calibration.
Professional installation and all necessary gaskets & fluids.
Chassis dyno testing. You'll receive a before & after dyno grapt
report showing power and torque measured at the rear wheels.
Road testing (up to 100 miles).
Hennessey exterior badge (rear).
HPE1000 Powered by Hennessey badges (side & rear).
Hennessy serial numbered plaque (interior).
Hennessey serial numbered plaque signed by the HPE
technician (engine bay).
Powered by Hennessey premium floor mats.
Serial numbered Certificate of Authenticity personally signed
by John Hennessey.
1 Year / 12,000 mile limited warranty. Contact a Hennessey
Performance sales associate for more details.
Shell V-Power 93 octane gasoline.
Pennzoil Ultra Platinum synthetic oil & filter change.
Discount from reusing upgrade components from HPE800
upgrade
Repeat customer
Transmission Build
93 Octane tune
HENNESSEY HPE1000 SUPERCHARGED ENGINE
POWER:
1000 bhp @ 6,400 rpm *
966 Ib-ft torque @ 4,000 rpm *
PERFORMANCE:
0-60 mph: 2.5 sec.
1/4 mile: 9.7 sec. @147 mph
Top speed: 220+ mph
INCLUDES:
High Flow Supercharger System
Fabricated Intake Manifold
Custom HE Camshaft
Ported Cylinder Heads
Upgraded Valve Springs and Retainers
Upgraded Intake valves & Exhaust Valves
Upgraded Lifters and Pushrods
High Flow Intercooling System
High Flow Air to Air Intercooler
Long-tube Stainless Steel Headers
Stainless Steel Midpipes
High Flow Catalytic Converters
All Necessary Gaskets & Fluids
Professional Installation
HE Engine Management Calibration
Dyno Tuning & Road Testing
Serial-Numbered Dash & Engine Plaques
Hennessy Exterior Badging
Hennessy Premium Floormats
2 Year / 24,000 Mile Limited Warranty
Contact a Hennessy Performance sales associate for more details.
Shell V-Power 93 octane gasoline.
Pennzoil Ultra Platinum synthetic oil & filter change.
Call Hennessey Performance for pricing and turnaround time details.
* C7 Corvette Z06's with an automatic transmission require a factory transmission upgrade
* Estimated power ratings at the engine- Acival powerheeihirsesued at the rear wheels, before
and after the upgrades are installed and tuned. Rear wheelhorsepower and torque figures are
approximately 15-20% lower than the facioy published power igures which are measured at the
crankshaft on an engine dyno.
RE: Letter of Authenticity
This letter certifies that your vehicle received the following upgrade from Hennessey
Performance:
2015 Chevrolet Corvette
VIN: 1G1YU2D64F5606228
HPE1000
Serial Number 03
Thank you for the opportunity to serve you. Have fun with your Hennessey tuned
vehicle and please let us know if we can be of any further help.
Sincerely,
Hennessy Performance
John Hennessey
Founder & President / CEO
FACTORY UPGRADES FROM CHEVY HIGH VALUED OPTIONS ON THE MSRP
Transmission, 8 Speed Paddle Shift
With Automatic Modes
Axle, 2.41 Ratio, Electronic
Limited Slip (Elsd)
3 LZ Preferred Equipment
Wheels, Z06 Black Aluminum
Tires, Front P285/30 ZR19 And
Rear P335/25 ZR20 Michelin Pilot Super
Sport Cup 2 Summer Only, Run Flat included
Shark Gray Metallic
Jet Black, Leather Seating Surfaces
With Sueded Microfiber Inserts
Seat Trim Processing Code
Performance Package
Battery Protection Package
Suspension, Z07 included
Brakes, 4 Wheel Antilock, 4 Wheel
Disc, Ceramic
Calipers, Dark Gray Metallic Painted
Carbon Flash Full Length Dual
Racing Stripe Package
Roof Panel, Visible Carbon Fiber
With Body Color Surround, Removable
Mirrors, Outside, Carbon Flash
Painted
Carbon Flash Painted Ground
Effects Package
Trim, Interior, Carbon Fiber,
Instrument Panel
Remote Vehicle Starter System
WEBSITE AUTOCOLLECTIONOFMURFREESBORO.COM
OVER 80 DETAILED PHOTOS
FINANCING AVAILABLE
INSTAGRAM @AUTOCOLLECTIONOFMURFREESBORO
Has been serviced and maintained, just service, never been smoked in, high valued options include,
This Hennessey Corvette Was the 3rd one built and is signed by John hennessey, It is very well taken care of and garage kept, previous owner barely drove it, All standard hennessey Upgrades listed below,
Corvette Z06 HPE1000 upgrade
Includes:
High-flow supercharger system.
Extreme duty intercooler system.
416 CID Stroker motor.
4.0-inch Stroker crankshaft.
Custom forged aluminum pistons with 10.0:1 compression rati
& steel wrist pins.
6.125-inch Billet steel H-beam connecting rods with ARP bolts
Balance, blueprint & assemble shortblock: fully de-bur block,
line hone block with ARP main studs, deck block.
Bore block on 3-axis CNC mill, hone block with torque plates,
balance crankshaft, check bearing clearances.
Assemble shortblock.
CNC Ported Cylinder Heads ports- Competition valve job,
extensive flow testing, chambers milled to desired cc.
Lightweight hollow stem intake valves, exhaust valves.
Extreme duty dual valve springs.
Titanium retainers, machined locators & locks, GM valve seals.
Chamber volumes measures & adjusted for compression.
CNC work hand blended into valve job, spring pressures
measured & adjusted.
HE hydraulic roller camshaft upgrade.
Hydraulic lifter upgrade with extreme duty pushrods.
1.75 inch stainless steel long-tube headers.
Stainless steel mid-pipe exhaust upgrade.
High-flow catalytic converters.
HP engine management upgrade & chassis dyno calibration.
Professional installation and all necessary gaskets & fluids.
Chassis dyno testing. You'll receive a before & after dyno grapt
report showing power and torque measured at the rear wheels.
Road testing (up to 100 miles).
Hennessey exterior badge (rear).
HPE1000 Powered by Hennessey badges (side & rear).
Hennessy serial numbered plaque (interior).
Hennessey serial numbered plaque signed by the HPE
technician (engine bay).
Powered by Hennessey premium floor mats.
Serial numbered Certificate of Authenticity personally signed
by John Hennessey.
1 Year / 12,000 mile limited warranty. Contact a Hennessey
Performance sales associate for more details.
Shell V-Power 93 octane gasoline.
Pennzoil Ultra Platinum synthetic oil & filter change.
Discount from reusing upgrade components from HPE800
upgrade
Repeat customer
Transmission Build
93 Octane tune
HENNESSEY HPE1000 SUPERCHARGED ENGINE
POWER:
1000 bhp @ 6,400 rpm *
966 Ib-ft torque @ 4,000 rpm *
PERFORMANCE:
0-60 mph: 2.5 sec.
1/4 mile: 9.7 sec. @147 mph
Top speed: 220+ mph
INCLUDES:
High Flow Supercharger System
Fabricated Intake Manifold
Custom HE Camshaft
Ported Cylinder Heads
Upgraded Valve Springs and Retainers
Upgraded Intake valves & Exhaust Valves
Upgraded Lifters and Pushrods
High Flow Intercooling System
High Flow Air to Air Intercooler
Long-tube Stainless Steel Headers
Stainless Steel Midpipes
High Flow Catalytic Converters
All Necessary Gaskets & Fluids
Professional Installation
HE Engine Management Calibration
Dyno Tuning & Road Testing
Serial-Numbered Dash & Engine Plaques
Hennessy Exterior Badging
Hennessy Premium Floormats
2 Year / 24,000 Mile Limited Warranty
Contact a Hennessy Performance sales associate for more details.
Shell V-Power 93 octane gasoline.
Pennzoil Ultra Platinum synthetic oil & filter change.
Call Hennessey Performance for pricing and turnaround time details.
* C7 Corvette Z06's with an automatic transmission require a factory transmission upgrade
* Estimated power ratings at the engine- Acival powerheeihirsesued at the rear wheels, before
and after the upgrades are installed and tuned. Rear wheelhorsepower and torque figures are
approximately 15-20% lower than the facioy published power igures which are measured at the
crankshaft on an engine dyno.
RE: Letter of Authenticity
This letter certifies that your vehicle received the following upgrade from Hennessey
Performance:
2015 Chevrolet Corvette
VIN: 1G1YU2D64F5606228
HPE1000
Serial Number 03
Thank you for the opportunity to serve you. Have fun with your Hennessey tuned
vehicle and please let us know if we can be of any further help.
Sincerely,
Hennessy Performance
John Hennessey
Founder & President / CEO
FACTORY UPGRADES FROM CHEVY HIGH VALUED OPTIONS ON THE MSRP
Transmission, 8 Speed Paddle Shift
With Automatic Modes
Axle, 2.41 Ratio, Electronic
Limited Slip (Elsd)
3 LZ Preferred Equipment
Wheels, Z06 Black Aluminum
Tires, Front P285/30 ZR19 And
Rear P335/25 ZR20 Michelin Pilot Super
Sport Cup 2 Summer Only, Run Flat included
Shark Gray Metallic
Jet Black, Leather Seating Surfaces
With Sueded Microfiber Inserts
Seat Trim Processing Code
Performance Package
Battery Protection Package
Suspension, Z07 included
Brakes, 4 Wheel Antilock, 4 Wheel
Disc, Ceramic
Calipers, Dark Gray Metallic Painted
Carbon Flash Full Length Dual
Racing Stripe Package
Roof Panel, Visible Carbon Fiber
With Body Color Surround, Removable
Mirrors, Outside, Carbon Flash
Painted
Carbon Flash Painted Ground
Effects Package
Trim, Interior, Carbon Fiber,
Instrument Panel
Remote Vehicle Starter System
WEBSITE AUTOCOLLECTIONOFMURFREESBORO.COM
OVER 80 DETAILED PHOTOS
FINANCING AVAILABLE
INSTAGRAM @AUTOCOLLECTIONOFMURFREESBORO
Options
Custom Options
HIGH-FLOW SUPERCHARGER SYSTEM
EXTREME DUTY INTERCOOLER SYSTEM
416 CID STROKER MOTOR
4.0-INCH STROKER CRANKSHAFT
CUSTOM FORGED ALUMINUM PISTONS WITH 10.0:1 COMPRESSION RATI & STEEL WRIST PINS
6.125-INCH BILLET STEEL H-BEAM CONNECTING RODS WITH ARP BOLTS
BALANCE, BLUEPRINT & ASSEMBLE SHORTBLOCK: FULLY DE-BUR BLOCK
LINE HONE BLOCK WITH ARP MAIN STUDS, DECK BLOCK
BORE BLOCK ON 3-AXIS CNC MILL, HONE BLOCK WITH TORQUE PLATES,
BALANCE CRANKSHAFT, CHECK BEARING CLEARANCES.
ASSEMBLE SHORTBLOCK.
CNC PORTED CYLINDER HEADS PORTS- COMPETITION VALVE JOB
EXTENSIVE FLOW TESTING, CHAMBERS MILLED TO DESIRED CC.
LIGHTWEIGHT HOLLOW STEM INTAKE VALVES, EXHAUST VALVES
EXTREME DUTY DUAL VALVE SPRINGS
TITANIUM RETAINERS, MACHINED LOCATORS & LOCKS, GM VALVE SEALS
CHAMBER VOLUMES MEASURES & ADJUSTED FOR COMPRESSION.
CNC WORK HAND BLENDED INTO VALVE JOB, SPRING PRESSURES MEASURED & ADJUSTED.
HE HYDRAULIC ROLLER CAMSHAFT UPGRADE
HYDRAULIC LIFTER UPGRADE WITH EXTREME DUTY PUSHRODS
1.75 INCH STAINLESS STEEL LONG-TUBE HEADERS.
STAINLESS STEEL MID-PIPE EXHAUST UPGRADE
HIGH-FLOW CATALYTIC CONVERTERS
HP ENGINE MANAGEMENT UPGRADE & CHASSIS DYNO CALIBRATION.
PROFESSIONAL INSTALLATION AND ALL NECESSARY GASKETS & FLUIDS
CHASSIS DYNO TESTING. YOU\'LL RECEIVE A BEFORE & AFTER DYNO GRAPT
REPORT SHOWING POWER AND TORQUE MEASURED AT THE REAR WHEELS
ROAD TESTING (UP TO 100 MILES).
HENNESSEY EXTERIOR BADGE (REAR)
HPE1000 POWERED BY HENNESSEY BADGES (SIDE & REAR)
HENNESSY SERIAL NUMBERED PLAQUE (INTERIOR)
HENNESSEY SERIAL NUMBERED PLAQUE SIGNED BY THE HPE
TECHNICIAN (ENGINE BAY).
POWERED BY HENNESSEY PREMIUM FLOOR MATS.
SERIAL NUMBERED CERTIFICATE OF AUTHENTICITY PERSONALLY SIGNED BY JOHN HENNESSEY.
PERFORMANCE SALES ASSOCIATE FOR MORE DETAILS.
SHELL V-POWER 93 OCTANE GASOLINE
PENNZOIL ULTRA PLATINUM SYNTHETIC OIL & FILTER CHANGE
DISCOUNT FROM REUSING UPGRADE COMPONENTS FROM HPE800 UPGRADE
REPEAT CUSTOMER
TRANSMISSION BUILD
93 OCTANE TUNE
1000 BHP @ 6,400 RPM *
966 IB-FT TORQUE @ 4,000 RPM
PERFORMANCE: 0-60 MPH: 2.5 SEC.
1/4 MILE: 9.7 SEC. @147 MPH
HIGH FLOW SUPERCHARGER SYSTEM
FABRICATED INTAKE MANIFOLD
CUSTOM HE CAMSHAFT
PORTED CYLINDER HEADS
UPGRADED VALVE SPRINGS AND RETAINERS
UPGRADED INTAKE VALVES & EXHAUST VALVES
UPGRADED LIFTERS AND PUSHRODS
HIGH FLOW INTERCOOLING SYSTEM
HIGH FLOW AIR TO AIR INTERCOOLER
LONG-TUBE STAINLESS STEEL HEADERS
STAINLESS STEEL MIDPIPES
HIGH FLOW CATALYTIC CONVERTERS
ALL NECESSARY GASKETS & FLUIDS
PROFESSIONAL INSTALLATION
HE ENGINE MANAGEMENT CALIBRATION
DYNO TUNING & ROAD TESTING
SERIAL-NUMBERED DASH & ENGINE PLAQUES
HENNESSY EXTERIOR BADGING
HENNESSY PREMIUM FLOORMATS
SHELL V-POWER 93 OCTANE GASOLINE
PENNZOIL ULTRA PLATINUM SYNTHETIC OIL & FILTER CHANGE
CALL HENNESSEY PERFORMANCE FOR PRICING AND TURNAROUND TIME DETAILS
C7 CORVETTE Z06\'S WITH AN AUTOMATIC TRANSMISSION REQUIRE A FACTORY TRANSMISSION UPGRADE
* ESTIMATED POWER RATINGS AT THE ENGINE- ACIVAL POWERHEEIHIRSESUED AT THE REAR WHEELS, BEFORE AND AFTER THE UPGRADES ARE INSTALLED AND TUNED. REAR WHEELHORSEPOWER AND TORQUE FIGURES ARE APPROXIMATELY 15-20% LOWER THAN THE FACIOY PUBLISHED POWER IGURES WHICH ARE MEASURED AT THE CRANKSHAFT ON AN ENGINE DYNO.
Contact
Finance Calculator
Finance Calculator


























































































Similar Vehicles

Service Department

FINANCE CENTER
What People Say About Us





